SUNLU AMS Heater for Bambu Lab AMS Gen 1

Turn a first-generation Bambu Lab AMS into an actively heated filament-drying system. The SUNLU AMS Heater replaces the original AMS top cover so you can dry filament while printing without giving up the AMS sealed-storage and multicolor workflow.

IMPORTANT COMPATIBILITY NOTE
This is the heater/top-cover upgrade only. A Bambu Lab AMS is not included. It is designed only for the first-generation Bambu Lab AMS. It is not compatible with AMS Lite, AMS 2 Pro, or automatic material systems from other brands.

FEATURES
• Dry and print at the same time
• Dual-airflow circulation for more even heating
• Adjustable 35–70°C temperature range
• Reaches up to 70°C in approximately 20 minutes
• Adjustable humidity-control activation from 25%–50% RH; heating stops at 20% RH
• 0–99 hour timer
• Flat, stackable design for multi-AMS setups
• Approximately two-minute lid replacement using the included hardware
• PTC heating, thermostat protection, and software temperature/fan monitoring

SPECIFICATIONS
• Product size: 363 × 278 × 131 mm
• Net weight: 1.7 kg; packaged weight: 2.3 kg
• Input: AC 110 V, 60 Hz, US plug
• Rated power: 220 W; maximum operating power: 390 W
• Maximum current at 120 V: 4.15 A
• Standby power: 0.6 W
• Humidity display range: 10%–90%

IN THE BOX
SUNLU AMS Heater, 4 hinges, 8 hex screws, hex screwdriver, US power cord, and user manual.